e:cue DMX2PWM 3CH

DMX2PWM Dimmers enable control of low-voltage LEDs using a DMX512 controller. Using PWM (Pulse-Width Modulation) technique, they are designed for use with constant voltage LEDs with a maximum output current of 2 A per channel, or 2.5 A for the three-channel version. DMX512 signal is amplified through DMX2PWM Dimmers for convenient daisy-chaining. DMX2PWM Dimmers’ flexibility makes installations easy with auto and manual DMX512 addressing modes, and in the case of the nine-channel version, the option of using an RJ45 connector or loose wire for DMX512 connection. The reverse supply protection and self-resetting over-current protection ensure safety against possible damage due to incorrect wiring. The nine-channel version is conveniently mountable inside equipment racks using standard 35 mm wide DIN rail.

Specifications

	DMX2PWM 3	DMX2PWM 9
Dimensions (W x H x D)	94 x 71.5 x 24 mm / 3.66 x 2.81 x 0.94 inch	107 x 76 x 59 mm / 4.21 x 2.99 x 2.32 inch
Weight	0.08 kg / 0.18 lbs	0.228 kg / 0.5 lbs
Power	12 ... 48 V DC (screw terminals)	12 ... 48 V DC (screw terminals)
Quiescent current	12 V: 35 mA 24 V: 21 mA 48 V: 15 mA	12 V: 57 mA 24 V: 32 mA 48 V: 21 mA
Max. output current	2.5 A per channel	2 A per channel
Operating temperature	0 … 50 °C / 32 … 122 °F	0 ... 50 °C / 32 ... 122 °F
Storage temperature	-20 … 80 °C / -4 … 176 °F	-20 ... 80 °C / -4 ... 176 °F
Operating/storage hum.	0 … 80% non-condensing	0 ... 80% non-condensing
Protection class	IP 20	IP 20
Housing	Aluminium	Aluminium, plastic
Certification	CE, ETL, UKCA	CE, ETL, UKCA
Input	DMX512 (RJ45)	DMX512 (RJ45 or screw terminals)
Output	DMX512 (RJ45) for chaining multiple devices 3 x output channels (screw terminals) + connector: on input voltage - connector: low side PWM switch	DMX512 (RJ45 or screw terminals) for chaining multiple devices 9 x output channels (screw terminals): + connector: identical to input voltage - connector: low side PWM switch
	Always select the power supply output voltage accordingly to your LED fixture input voltage! 12 V PSU for 12 V LED 24 V PSU for 24 V LED 48 V PSU for 48 V LED

***Check our DOWNLOADS section below for more info.***