Renkus-Heinz ICC48/3-RN (White)

The Iconyx Compact series ICC48/3 brings the ultimate flexibility of the ICONYX Gen5 series to a smaller footprint array. An all-new forty-eight channel digital amplifier powers forty-eight 3″/77 mm full-range, high sensitivity, treated paper cone drivers. With an amplifier and DSP channel for each driver, all of the flexibility of ICONYX is now available in a package nearly 40% smaller than the classic ICONYX.

While the package is smaller, the performance is not. Full RHAON II beam steering with our latest U.R.G.O beam algorithms allows for a movable acoustic center, multiple beam opening angles and high-pass filtering of individual beams — all with the fidelity and musicality expected of a Renkus-Heinz product.

The ICC48/3 brings the performance and directivity of ICONYX to spaces where even the classic ICONYX arrays are too large. The very narrow cabinet will disappear into nearly any venue, while the high vertical directivity of the ICC48/3 can penetrate even challenging acoustics, bringing the exceptional performance of beam-steered line arrays to the most architecturally sensitive spaces.

The included wall-mount bracket makes mounting easy and is nearly invisible behind the array.

The ICC48/3 is available in white and black standard; custom color matching is optional. Standard -RN units have analog and AES inputs, and -RD1 units include Dante network audio.

ICC48/3-RN & RD1
Frequency Response::	All Models	135 Hz to 17 kHz (– 3dB) 110 Hz to 20 kHz (-10 dB)
Calculated Max SPL::	All Models	138 dB Peak, whole-space (108 dB @ 100 Ft. (30.5 meters))
Dispersion::	All Models	120º horizontal below 3 kHz, 90º above 3 kHz x adjustable vertical
Aiming Angle::	All Models	Adjustable from –30º to +30º
Beam Control::	All Models	Steerable from 200 Hz and up, directivity from 100 Hz and up.
Sensitivity::	All Models	1.4 volt RMS for rated output, analog
Transducers::	All Models	48 x 3 in./77 mm, full-range, high sensitivity, treated paper cone drivers
Inputs::	ICC48/3-RN	Analog and Loop-out AES and Loop-out
	ICC48/3-RD1	Analog and Loop-out AES and Loop-out Dante digital network audio
Connector::	ICC48/3-RN	2 x Phoenix, In & Loop-out, analog and AES. 2 x RJ45 Primary & Secondary Ethernet/RHAON II
	ICC48/3-RD1	2 x Phoenix, In & Loop-out, analog and AES. 2 x RJ45 Primary & Secondary Ethernet/RHAON II/Dante
Enclosure::	All Models	Folded aluminum
Grille::	All Models	16 GA powder-coated, plated, perforated steel
Finish::	All Models	Black (RAL9011) or White (RAL9010) paint, standard, custom color available.
Mounting::	All Models	W-WALL-IC3 wall mount bracket, included
Dimensions::	All Models	4-3/8 in. (111 mm) wide 157 in. (3997 mm) high 4-3/4 in. (121 mm) deep
ICC 48 Channel Amplifier
Power Output::	All Models	Forty-eight channel amplifier. Multi-band peal and thermal limiting on all channels protects the drivers.
Mains Voltage::	All Models	100-240 volts, 50/60 Hz, auto-switching
Power Consumption::	All Models	Idle: 0.60 A (120 V) / 0.30 A (240 V) 1/8 power: 1.70 A (120 V) / 0.85 A (240 V) (onset of limiting) 1/3 power: 4.60 A (120 V) / 2.30 A (240 V) (hard limiting)
Power Connector::	All Models	Hard wired Wago Quick Connection.
Latency::	ICC48/3-RN	9 ms
	ICC48/3-RD1	9 ms + Dante Transport Latency
User DSP::	All Models	Eight parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
Temperature Limits::	All Models	Max.: 140º F/60º C, with no direct sun exposure. Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.